reinforced with GF PA66 modified nylon66 engineering plastic granules

Wear- resistant
30% GF
reinforced

Performance	Test condition	Testing standard	Units	AZ601
Mechanical property
Tensile modulus	50mm/min	ISO527-1/2	Mpa
Yield stress	50mm/min	ISO527-1/2	Mpa
Tensile strength	50mm/min	ISO527-1/2	Mpa	175
Elongation at break	5mm/min 50mm/min	ISO527-1/2	%	2.12
Bending modulus	2mm/min	ISO178	Mpa	9600
Bending strength	2mm/min	ISO178	Mpa	248
Charpy notched impact strength	23°C	ISO179/leA	KJ/m2	12.6
Charpy unnotched impact strength	23°C	ISO179/leA	KJ/m2	65
Thermal
Melting	DSC.10K/min	ISO3146	°C	265
Heat distortion temp. A	1.8Mpa	ISO75	°C	250
Heat distortion temp. B	0.45Mpa	ISO75	°C	255
Electrical property
Surface resistivity		IEC60093	Ohm	1/0.1
Volume resistivity		IEC60093	Ohm×cm	10/0.1
Anti-arc-track of	TestotutionA	IEC60012	V
Physical property
Density	23°C	ISO1183	g/cm3
Hygroscopicity	23°C,50%r.h	ISO62	%
Absorbent/water absorption	23°C /saturtion	ISO62	%	0.9
Radial shrinkage	flow	ISO294-4	%	0.58
Transverse shrinkage	transverse	ISO294-4	%	0.25
Flame retardant
Flammability test	1.6/3.0mm	UL94
The level of flame-retardant test	1mm thickness	ISO3795	mm/min
Material description				PA66+30GF wear-resisitant MOS2